View TYN608RG_7171198.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

october 2011 doc id 7476 rev 7 1/13 13 tn805, tn815 ts820, tyn608 sensitive and standard 8 a scrs features on-state rms current, i t(rms) 8 a repetitive peak off-state voltage, v drm /v rrm 600 and 800 v triggering gate current, i gt 0.2 to 15 ma description available either in sensitive (ts8) or standard (tn8 / tyn) gate triggering levels, the 8 a scr series is suitable to fit all modes of control found in applications such as overvoltage crowbar protection, motor control circuits in power tools and kitchen aids, inrush current limiting circuits, capacitive discharge ignition and voltage regulation circuits. available in through-hole or surface-mount packages, they provide an optimized performance in a limited space. a k g a a a k g a k g a a k g a ak g a k g to-220ab ts820-600t to-220ab TYN608RG dpak tn805-600b tn815-x00b ts820-600b ipak ts820-600h to-220fpab ts820-600fp table 1. device summary order code voltage (x00) v drm /v rrm sensitivity i gt package 600 v 800 v ts820-600b x 0.2 ma dpak ts820-600h x 0.2 ma ipak ts820-600t x 0.2 ma to-220ab ts820-600fp x 0.2 ma to-220fpab tn805-600b x 5 ma dpak tn815-x00b x x 15 ma dpak TYN608RG x 15 ma to-220ab www.st.com
characteristics tn805, tn815, ts820, tyn608 2/13 doc id 7476 rev 7 1 characteristics table 2. absolute ratings (limiting values) symbol parameter value unit tn805 tn815 ts820 tyn608 i t(rms) on-state rms current (180 conduction angle) t c = 110 c 8a t0-220fpab, t c = 91 c i t(av) average on-state current (180 conduction angle) t c = 110 c 5a t0-220fpab, t c = 91 c i tsm non repetitive surge peak on-state current t p = 8.3 ms t j = 25 c 73 100 a t p = 10 ms 70 95 i 2 ti 2 t value for fusing t p = 10 ms t j = 25 c 24.5 45 a 2 s di/dt critical rate of rise of on-state current i g = 2 x i gt , t r 100 ns f = 60 hz t j = 125 c 50 a/s i gm peak gate current t p = 20 s t j = 125 c 4 a p g(av) average gate power dissipation t j = 125 c 1 w t stg t j storage junction temperature range operating junction temperature range - 40 to + 150 - 40 to + 125 c v rgm maximum peak reverse gate voltage (for tn8x5 and tyn608 only) 5 v table 3. sensitive electrical characteristics (t j = 25 c, unless otherwise specified) symbol test conditions ts820 unit i gt v d = 12 v, r l = 140 max. 200 a v gt max. 0.8 v v gd v d = v drm, r l = 3.3 k , r gk = 220 t j = 125 c min. 0.1 v v rg i rg = 10 a min. 8 v i h i t = 50 ma, r gk = 1 k max. 5 ma i l i g = 1 ma ,, r gk = 1 k max. 6 ma dv/dt v d = 65% v drm , r gk = 220 t j = 125 c min. 5 v/s v tm i tm = 16 a, t p = 380 s t j = 25 c max. 1.6 v v t0 threshold voltage t j = 125 c max. 0.85 v r d dynamic resistance t j = 125 c max. 46 m i drm i rrm v drm = v rrm , r gk = 220 t j = 25 c max. 5a t j = 125 c 1 ma
tn805, tn815, ts820, tyn608 characteristics doc id 7476 rev 7 3/13 table 4. standard electrical characteristics (t j = 25 c, unless otherwise specified) symbol test conditions tn805 tn815 tyn608 unit i gt v d = 12 v, r l = 33 min. 0.5 2 2 ma max. 5 15 15 v gt max. 1.3 v v gd v d = v drm, r l = 3.3 k t j = 125 c min. 0.2 v i h i t = 100 ma , gate open max. 25 40 30 ma i l i g = 1.2 i gt max. 30 50 70 ma dv/dt v d = 67% v drm, gate open t j =125 c min. 50 150 150 v/s v tm i tm = 16 a t p = 380 s t j = 25 c max. 1.6 v v t0 threshold voltage t j = 125 c max. 0.85 v r d dynamic resistance t j = 125 c max. 46 m i drm i rrm v drm = v rrm t j = 25 c max. 5a t j = 125 c 2 ma table 5. thermal resistance symbol parameter value unit r th(j-c) junction to case (dc) dpak, ipak, to-220ab 1.3 c/w to-220fpab 4.6 r th(j-a) junction to ambient (dc) s (1) = 0.5 cm 2 dpak 70 c/w ipak 100 to-220ab, to-220fpab 60 1. s = copper surface under tab figure 1. maximum average power dissipation versus average on-state current figure 2. average and dc on-state current versus case temperature 0 12 3 4 56 0 1 2 3 4 5 6 7 8 p(w) i (a) t(av) = 180 360 i (a) t(av) 0 1 2 3 4 5 6 7 8 9 10 0 25 50 75 100 125 dpak ipak to-220ab to-220fpab d.c. = 180 t (c) case
characteristics tn805, tn815, ts820, tyn608 4/13 doc id 7476 rev 7 figure 3. average and dc on-state current versus ambient temperature figure 4. relative variation of thermal impedance junction to case versus pulse duration i (a) t(av) 0,0 0,5 1,0 1,5 2,0 2,5 0 25 50 75 100 125 dpak ipak to-220ab to-220fpab t (c) amb d.c. = 180 recommended pad layout, fr4 printed circuit board 1e-3 1e-2 1e-1 1e+0 0.1 0.2 0.5 1.0 k=[z /r th(j-c) th(j-c) ] t (s) p figure 5. relative variation of thermal impedance junction to ambient versus pulse duration figure 6. relative variation of gate trigger current and holding current versus junction temperature for ts820 1e-2 1e-1 1e+0 1e+1 1e+2 5e+2 0.01 0.10 1.00 k=[z /r th(j-a) th(j-a) ] t (s) p dpak to-220ab / ipak to-220fpab recommended pad layout, fr4 printed circuit board -40 -20 0 40 20 60 80 100 120 140 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 t (c) j i,i,i[t] / gthl j i ,i ,i [t =25c] gthl j i gt i h & i r = 1k l gk figure 7. relative variation of gate trigger and holding current versus junction temperature figure 8. relative variation of holding current versus gate-cathode resistance (typical values) -40 -20 0 20 40 60 80 100 120 140 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 t (c) j i,i,i[t] / gthl j i ,i ,i [t =25c] gthl j i gt i h & i l tn8 and tynx8 1e-2 1e-1 1e+0 1e+1 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 r(k) gk i [r ] / i [ =1k ] hgk h r gk t j = 25c ts8
tn805, tn815, ts820, tyn608 characteristics doc id 7476 rev 7 5/13 figure 9. relative variation of dv/dt immunity versus gate-cathode resistance (typical values) for ts820 figure 10. relative variation of dv/dt immunity versus gate-cathode capacitance (typical values) for ts820 0 200 400 600 800 1000 1200 1400 1600 1800 2000 0.01 0.10 1.00 10.00 r(k) gk dv/dt[r ] / dv/dt[ =220 ] gk r gk t j = 125c v = 0.67 x v d drm 0 20 40 60 80 100 120 140 160 180 200 220 0.0 2.5 5.0 7.5 10.0 12.5 15.0 c (nf) gk dv/dt[c ] / dv/dt[ =220 ] gk r gk t v = 0.67 x v = 125c r = 220 d drm gk j figure 11. surge peak on-state current versus number of cycles figure 12. non-repetitive surge peak on-state current and corresponding values of i 2 t 1 10 100 1000 0 10 20 30 40 50 60 70 80 90 100 i (a) tsm number of cycles non repetitive t initial=25c j repetitive t =110c c tn8 / ts8 tyn08 t =10ms p one cycle 0.01 0.10 1.00 10.00 10 100 1000 i (a), i t (a s) tsm 22 t (ms) p i t 2 i tsm t initial = 25c j tn8 / ts8 tn8 / ts8 tyn08 tyn08 di/dt limitation sinusoidal pulse width tp < 10 ms figure 13. on-state characteristics (maximum values) figure 14. thermal resistance junction to ambient versus copper surface under tab (dpak) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0.1 1.0 10.0 50.0 i (a) tm v (v) tm t j =max t =25c j v =0.85v r =46m t max.: j t0 d 0 2 4 6 8 10 12 14 16 18 20 0 20 40 60 80 100 s(cm2) r (c/w) th(j-a) epoxy printed circuit board fr4 copper thickness = 35 m
ordering information scheme tn 805, tn815, ts820, tyn608 6/13 doc id 7476 rev 7 2 ordering information scheme figure 15. tn8 series figure 16. ts8 series figure 17. tynx08 series tn 8 05 - 600 b -tr standard scr series sensitivity voltage package packing mode current 8 = 8 a 05 = 5 ma 15 = 15 ma 600 = 600 v 800 = 800 v b = dpak -tr = tape and reel ts 8 20 - 600 b (-tr) sensitive scr series sensitivity voltage package packing mode current 8 = 8 a 20 = 200 a 600 = 600 v b = dpak h = ipak t = to-220ab fp = to220fpab blank = tube -tr = tape and reel tyn 6 08 rg standard scr series packing mode voltage current 6 = 600 v 8 = 8 a rg = tube
tn805, tn815, ts820, tyn608 package information doc id 7476 rev 7 7/13 3 package information epoxy meets ul94, v0 lead-free packages recommended torque: 0.4 to 0.6 nm in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. figure 18. footprint (dimensions in mm) table 6. dpak dimensions ref. dimensions millimeters inches min. max. min. max. a 2.20 2.40 0.086 0.094 a1 0.90 1.10 0.035 0.043 a2 0.03 0.23 0.001 0.009 b 0.64 0.90 0.025 0.035 b2 5.20 5.40 0.204 0.212 c 0.45 0.60 0.017 0.023 c2 0.48 0.60 0.018 0.023 d 6.00 6.20 0.236 0.244 e 6.40 6.60 0.251 0.259 g 4.40 4.60 0.173 0.181 h 9.35 10.10 0.368 0.397 l2 0.80 typ. 0.031 typ. l4 0.60 1.00 0.023 0.039 v2 0 8 0 8 h l4 g b l2 e b2 d a1 r r c a c2 0.60 min. v2 a2 6.7 6.7 3 3 1.6 1.6 2.3 2.3
package information tn805, tn815, ts820, tyn608 8/13 doc id 7476 rev 7 table 7. ipak dimensions ref. dimensions millimeters inches min. typ. max. min. typ. max. a 2.20 2.40 0.086 0.094 a1 0.90 1.10 0.035 0.043 a3 0.70 1.30 0.027 0.051 b 0.64 0.90 0.025 0.035 b2 5.20 5.40 0.204 0.212 b3 0.95 0.037 b5 0.30 0.035 c 0.45 0.60 0.017 0.023 c2 0.48 0.60 0.019 0.023 d 6 6.20 0.236 0.244 e 6.40 6.60 0.252 0.260 e2.28 0.090 g 4.40 4.60 0.173 0.181 h 16.10 0.634 l 9 9.40 0.354 0.370 l1 0.8 1.20 0.031 0.047 l2 0.80 1 0.031 0.039 v1 10 10 h l l1 g e b5 b v1 d c a1 a3 a c2 b3 l2 e b2
tn805, tn815, ts820, tyn608 package information doc id 7476 rev 7 9/13 table 8. to-220ab dimensions (for ts820-xxxt) ref. dimensions millimeters inches min. max. min. max. a 4.40 4.60 0.173 0.181 c 1.23 1.32 0.048 0.051 d 2.40 2.72 0.094 0.107 e 0.49 0.70 0.019 0.027 f 0.61 0.88 0.024 0.034 f1 1.14 1.70 0.044 0.066 f2 1.14 1.70 0.044 0.066 g 4.95 5.15 0.194 0.202 g1 2.40 2.70 0.094 0.106 h2 10 10.40 0.393 0.409 l2 16.4 typ. 0.645 typ. l4 13 14 0.511 0.551 l5 2.65 2.95 0.104 0.116 l6 15.25 15.75 0.600 0.620 l7 6.20 6.60 0.244 0.259 l9 3.50 3.93 0.137 0.154 m 2.6 typ. 0.102 typ. diam. 3.75 3.85 0.147 0.151 a c d l7 dia l5 l6 l9 l4 f h2 g g1 l2 f2 f1 e m
package information tn805, tn815, ts820, tyn608 10/13 doc id 7476 rev 7 table 9. to-220ab dimensions (for tynx8 series) ref. dimensions millimeters inches min. typ. max. min. typ. max. a 15.20 15.90 0.598 0.625 a1 3.75 0.147 a2 13.00 14.00 0.511 0.551 b 10.00 10.40 0.393 0.409 b1 0.61 0.88 0.024 0.034 b2 1.23 1.32 0.048 0.051 c 4.40 4.60 0.173 0.181 c1 0.49 0.70 0.019 0.027 c2 2.40 2.72 0.094 0.107 e 2.40 2.70 0.094 0.106 f 6.20 6.60 0.244 0.259 ?i 3.75 3.85 0.147 0.151 i4 15.80 16.40 16.80 0.622 0.646 0.661 l 2.65 2.95 0.104 0.116 l2 1.14 1.70 0.044 0.066 l3 1.14 1.70 0.044 0.066 m2.60 0.102 c b2 c2 f ? i l a a1 a2 b e b1 i4 l3 l2 c1 m
tn805, tn815, ts820, tyn608 package information doc id 7476 rev 7 11/13 table 10. to-220fpab dimensions ref. dimensions millimeters inches min. max. min. max. a 4.4 4.6 0.173 0.181 b 2.5 2.7 0.098 0.106 d 2.5 2.75 0.098 0.108 e 0.45 0.70 0.018 0.027 f 0.75 1 0.030 0.039 f1 1.15 1.70 0.045 0.067 f2 1.15 1.70 0.045 0.067 g 4.95 5.20 0.195 0.205 g1 2.4 2.7 0.094 0.106 h 10 10.4 0.393 0.409 l2 16 typ. 0.63 typ. l3 28.6 30.6 1.126 1.205 l4 9.8 10.6 0.386 0.417 l5 2.9 3.6 0.114 0.142 l6 15.9 16.4 0.626 0.646 l7 9.00 9.30 0.354 0.366 dia. 3.00 3.20 0.118 0.126 h a b dia l7 l6 l5 f1 f2 f d e l4 g1 g l2 l3
ordering information tn805, tn815, ts820, tyn608 12/13 doc id 7476 rev 7 4 ordering information 5 revision history table 11. ordering information order code marking package we ight base qty delivery mode tn805-600b-tr tn805600 dpak 0.3 g 2500 tape and reel tn815-600b-tr tn815600 dpak 0.3 g 2500 tape and reel tn815-800b-tr tn815800 dpak 0.3 g 2500 tape and reel ts820-600b ts820600 dpak 0.3 g 75 tube ts820-600b-tr ts820600 dpak 0.3 g 2500 tape and reel ts820-600h ts820600 ipak 0.4 g 75 tube ts820-600t ts820600t to-220ab 2.3 g 50 tube ts820-600fp ts820600 to-220fpab 2.0 g 50 tube TYN608RG tyn608 to-220ab 2.3 g 50 tube table 12. document revision history date revision changes apr-2002 4a last update. 13-feb-2006 5 to-220ab delivery mode changed from bulk to tube. ecopack statement added. 22-jan-2010 6 alpha definition updated in figure 1 . thermal resistance, junction to case, updated in ta bl e 5 . 10-oct-2011 7 added to-220fpab package. removed 700 v and 1000 v products.
tn805, tn815, ts820, tyn608 doc id 7476 rev 7 13/13 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by two authorized st representatives, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2011 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of TYN608RG

	To Download TYN608RG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .